Henry-Hiles/qmk_userspace
1
0
Fork 0
forked from mirrors/qmk_userspace
Code Pull requests Activity

Move GMMK Pro to allow for multiple revisions (#16423)

Browse source 
* Added GMMK PRO Rev2 WBG7 MCU compatibility. Added GMMK 2 WBG7 MCU compatibility.

* GMMK PRO MCU Updates only (removed other kbs)

* fix problems

* Optimize the code.

* Update form develop branch

* Update

* Updater from qmk/develop

* Update

* Update config.h

* Update config.h

* Remove gmmk pro rev2

* move moults31/keymap.c

* Update

* tidy up

Co-authored-by: Joy <chang.li@westberrytech.com>
Co-authored-by: zvecr <git@zvecr.com>
This commit is contained in:
GloriousThrall 2022-05-19 19:47:22 -05:00 • committed by GitHub
commit 83fa6fe916
Failed to generate hash of commit
125 changed files with 82 additions and 23 deletions
Download patch file Download diff file Expand all files Collapse all files

37
keyboards/gmmk/pro/iso/readme.md
View file

@ -1,37 +0,0 @@
# GMMK PRO (ISO)
A tenkeyless 75% keyboard made and sold by Glorious LLC. Equipped with the STM32 ARM Cortex-M4 microcontroller, with support for rotary encoders and three additional layouts. [More info at Glorious](https://www.pcgamingrace.com/products/glorious-gmmk-pro-75-barebone-black-reservation)
* Keyboard Maintainer: [GloriousThrall](https://github.com/GloriousThrall)
* Hardware Supported: GMMK Pro
* Hardware Availability: [GloriousPCGaming.com](https://www.pcgamingrace.com/products/glorious-gmmk-pro-75-barebone-black-reservation)
Make example for this keyboard (after setting up your build environment):
make gmmk/pro/iso:default
Flashing example for this keyboard:
make gmmk/pro/iso:default:flash
To reset the board into bootloader mode, do one of the following:
* Hold the Reset switch mounted on the bottom side of the PCB while connecting the USB cable
* Hold the Escape key while connecting the USB cable (also erases persistent settings)
* Fn+Backspace will reset the board to bootloader mode if you have flashed the default QMK keymap
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Case Screw Replacements
Many users report stripped case screws when disassembling the board.
The stock case screws are:
* Thread: M2
* Thread length: ~5 mm
* Head diameter: ~3.8 mm
* Head counterbore diameter: ~4.0 mm
* Head counterbore depth: ~1.9 mm
Most M2x5mm screws should fit fine, although it's best to ensure that the screw head will fit inside the counterbore.
For reference, [this hex socket head screw](https://www.mcmaster.com/91292A005/) from McMaster-Carr should fit nearly flush (head will protrude above the counterbore by ~0.1 mm).