Henry-Hiles/qmk_userspace
1
0
Fork 0
forked from mirrors/qmk_userspace
Code Pull requests Activity

Create generic Pointing Device Pin defines (#17776)

Browse source
This commit is contained in:
Drashna Jaelre 2022-08-12 16:22:34 -07:00 • committed by GitHub
commit ccdba43e59
Failed to generate hash of commit
6 changed files with 80 additions and 40 deletions
Download patch file Download diff file Expand all files Collapse all files

36
docs/feature_pointing_device.md
View file

@ -22,11 +22,13 @@ POINTING_DEVICE_DRIVER = adns5050
The ADNS 5050 sensor uses a serial type protocol for communication, and requires an additional light source. The ADNS 5050 sensor uses a serial type protocol for communication, and requires an additional light source.
| Setting | Description | | Setting | Description | Default |
| ------------------- | ------------------------------------------------------------------- | | ------------------- | ------------------------------------------------------------------- | -------------------------- |
| `ADNS5050_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | | `ADNS5050_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | `POINTING_DEVICE_SCLK_PIN` |
| `ADNS5050_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | | `ADNS5050_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | `POINTING_DEVICE_SDIO_PIN` |
| `ADNS5050_CS_PIN` | (Required) The pin connected to the cable select pin of the sensor. | | `ADNS5050_CS_PIN` | (Required) The pin connected to the cable select pin of the sensor. | `POINTING_DEVICE_CS_PIN` |
The CPI range is 125-1375, in increments of 125. Defaults to 500 CPI. The CPI range is 125-1375, in increments of 125. Defaults to 500 CPI.
@ -41,12 +43,12 @@ POINTING_DEVICE_DRIVER = adns9800
The ADNS 9800 is an SPI driven optical sensor, that uses laser output for surface tracking. The ADNS 9800 is an SPI driven optical sensor, that uses laser output for surface tracking.
| Setting | Description | Default | | Setting | Description | Default |
| ----------------------- | ---------------------------------------------------------------------- | ------------- | | ----------------------- | ---------------------------------------------------------------------- | ------------------------ |
| `ADNS9800_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` | | `ADNS9800_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` |
| `ADNS9800_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` | | `ADNS9800_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` |
| `ADNS9800_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` | | `ADNS9800_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` |
| `ADNS9800_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ | | `ADNS9800_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
| `ADNS9800_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ | | `ADNS9800_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` |
The CPI range is 800-8200, in increments of 200. Defaults to 1800 CPI. The CPI range is 800-8200, in increments of 200. Defaults to 1800 CPI.
@ -117,12 +119,12 @@ Default attenuation is set to 4X, although if you are using a thicker overlay (s
| `CIRQUE_PINNACLE_TIMEOUT` | (Optional) The timeout for i2c communication with the trackpad in milliseconds. | `20` | | `CIRQUE_PINNACLE_TIMEOUT` | (Optional) The timeout for i2c communication with the trackpad in milliseconds. | `20` |
| SPI Setting | Description | Default | | SPI Setting | Description | Default |
| ------------------------------ | ---------------------------------------------------------------------- | ------------- | | ------------------------------ | ---------------------------------------------------------------------- | ------------------------ |
| `CIRQUE_PINNACLE_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `1000000` | | `CIRQUE_PINNACLE_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `1000000` |
| `CIRQUE_PINNACLE_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` | | `CIRQUE_PINNACLE_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` |
| `CIRQUE_PINNACLE_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `1` | | `CIRQUE_PINNACLE_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `1` |
| `CIRQUE_PINNACLE_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ | | `CIRQUE_PINNACLE_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
| `CIRQUE_PINNACLE_SPI_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ | | `CIRQUE_PINNACLE_SPI_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` |
Default Scaling is 1024. Actual CPI depends on trackpad diameter. Default Scaling is 1024. Actual CPI depends on trackpad diameter.
@ -170,10 +172,10 @@ POINTING_DEVICE_DRIVER = paw3204
The paw 3204 sensor uses a serial type protocol for communication, and requires an additional light source. The paw 3204 sensor uses a serial type protocol for communication, and requires an additional light source.
| Setting | Description | | Setting | Description | Default |
|--------------------|---------------------------------------------------------------------| | ------------------ |--------------------------------------------------------------- | -------------------------- |
|`PAW3204_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | | `PAW3204_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | `POINTING_DEVICE_SCLK_PIN` |
|`PAW3204_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | | `PAW3204_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | `POINTING_DEVICE_SDIO_PIN` |
The CPI range is 400-1600, with supported values of (400, 500, 600, 800, 1000, 1200 and 1600). Defaults to 1000 CPI. The CPI range is 400-1600, with supported values of (400, 500, 600, 800, 1000, 1200 and 1600). Defaults to 1000 CPI.
@ -218,8 +220,8 @@ The CPI range is 50-16000, in increments of 50. Defaults to 2000 CPI.
Both PMW 3360 and PMW 3389 are SPI driven optical sensors, that use a built in IR LED for surface tracking. Both PMW 3360 and PMW 3389 are SPI driven optical sensors, that use a built in IR LED for surface tracking.
| Setting | Description | Default | | Setting | Description | Default |
| ---------------------------- | ------------------------------------------------------------------------------------------- | ------------- | | ---------------------------- | ------------------------------------------------------------------------------------------- | ------------------------ |
| `PMW33XX_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ | | `PMW33XX_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` |
| `PMW33XX_CS_PINS` | (Alternative) Sets the Cable Select pins connected to multiple sensors. | _not defined_ | | `PMW33XX_CS_PINS` | (Alternative) Sets the Cable Select pins connected to multiple sensors. | _not defined_ |
| `PMW33XX_CPI` | (Optional) Sets counts per inch sensitivity of the sensor. | _varies_ | | `PMW33XX_CPI` | (Optional) Sets counts per inch sensitivity of the sensor. | _varies_ |
| `PMW33XX_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` | | `PMW33XX_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` |
@ -290,9 +292,13 @@ void pointing_device_driver_set_cpi(uint16_t cpi) {}
| `POINTING_DEVICE_TASK_THROTTLE_MS` | (Optional) Limits the frequency that the sensor is polled for motion. | _not defined_ | | `POINTING_DEVICE_TASK_THROTTLE_MS` | (Optional) Limits the frequency that the sensor is polled for motion. | _not defined_ |
| `POINTING_DEVICE_GESTURES_CURSOR_GLIDE_ENABLE` | (Optional) Enable inertial cursor. Cursor continues moving after a flick gesture and slows down by kinetic friction. | _not defined_ | | `POINTING_DEVICE_GESTURES_CURSOR_GLIDE_ENABLE` | (Optional) Enable inertial cursor. Cursor continues moving after a flick gesture and slows down by kinetic friction. | _not defined_ |
| `POINTING_DEVICE_GESTURES_SCROLL_ENABLE` | (Optional) Enable scroll gesture. The gesture that activates the scroll is device dependent. | _not defined_ | | `POINTING_DEVICE_GESTURES_SCROLL_ENABLE` | (Optional) Enable scroll gesture. The gesture that activates the scroll is device dependent. | _not defined_ |
| `POINTING_DEVICE_CS_PIN` | (Optional) Provides a default CS pin, useful for supporting multiple sensor configs. | _not defined_ |
| `POINTING_DEVICE_SDIO_PIN` | (Optional) Provides a default SDIO pin, useful for supporting multiple sensor configs. | _not defined_ |
| `POINTING_DEVICE_SCLK_PIN` | (Optional) Provides a default SCLK pin, useful for supporting multiple sensor configs. | _not defined_ |
!> When using `SPLIT_POINTING_ENABLE` the `POINTING_DEVICE_MOTION_PIN` functionality is not supported and `POINTING_DEVICE_TASK_THROTTLE_MS` will default to `1`. Increasing this value will increase transport performance at the cost of possible mouse responsiveness. !> When using `SPLIT_POINTING_ENABLE` the `POINTING_DEVICE_MOTION_PIN` functionality is not supported and `POINTING_DEVICE_TASK_THROTTLE_MS` will default to `1`. Increasing this value will increase transport performance at the cost of possible mouse responsiveness.
The `POINTING_DEVICE_CS_PIN`, `POINTING_DEVICE_SDIO_PIN`, and `POINTING_DEVICE_SCLK_PIN` provide a convenient way to define a single pin that can be used for an interchangeable sensor config. This allows you to have a single config, without defining each device. Each sensor allows for this to be overridden with their own defines.
!> Any pointing device with a lift/contact status can integrate inertial cursor feature into its driver, controlled by `POINTING_DEVICE_GESTURES_CURSOR_GLIDE_ENABLE`. e.g. PMW3360 can use Lift_Stat from Motion register. Note that `POINTING_DEVICE_MOTION_PIN` cannot be used with this feature; continuous polling of `get_report()` is needed to generate glide reports. !> Any pointing device with a lift/contact status can integrate inertial cursor feature into its driver, controlled by `POINTING_DEVICE_GESTURES_CURSOR_GLIDE_ENABLE`. e.g. PMW3360 can use Lift_Stat from Motion register. Note that `POINTING_DEVICE_MOTION_PIN` cannot be used with this feature; continuous polling of `get_report()` is needed to generate glide reports.

18
drivers/sensors/adns5050.h
View file

@ -40,15 +40,27 @@
// Definitions for the ADNS serial line. // Definitions for the ADNS serial line.
#ifndef ADNS5050_SCLK_PIN #ifndef ADNS5050_SCLK_PIN
# error "No clock pin defined -- missing ADNS5050_SCLK_PIN" # ifdef POINTING_DEVICE_SCLK_PIN
# define ADNS5050_SCLK_PIN POINTING_DEVICE_SCLK_PIN
# else
# error "No clock pin defined -- missing POINTING_DEVICE_SCLK_PIN or ADNS5050_SCLK_PIN"
# endif
#endif #endif
#ifndef ADNS5050_SDIO_PIN #ifndef ADNS5050_SDIO_PIN
# error "No data pin defined -- missing ADNS5050_SDIO_PIN" # ifdef POINTING_DEVICE_SDIO_PIN
# define ADNS5050_SDIO_PIN POINTING_DEVICE_SDIO_PIN
# else
# error "No data pin defined -- missing POINTING_DEVICE_SDIO_PIN or ADNS5050_SDIO_PIN"
# endif
#endif #endif
#ifndef ADNS5050_CS_PIN #ifndef ADNS5050_CS_PIN
# error "No chip select pin defined -- missing ADNS5050_CS_PIN" # ifdef POINTING_DEVICE_CS_PIN
# define ADNS5050_CS_PIN POINTING_DEVICE_CS_PIN
# else
# error "No chip select pin defined -- missing POINTING_DEVICE_CS_PIN or ADNS5050_CS_PIN define"
# endif
#endif #endif
typedef struct { typedef struct {

6
drivers/sensors/adns9800.h
View file

@ -43,7 +43,11 @@
#endif #endif
#ifndef ADNS9800_CS_PIN #ifndef ADNS9800_CS_PIN
# error "No chip select pin defined -- missing ADNS9800_CS_PIN" # ifdef POINTING_DEVICE_CS_PIN
# define ADNS9800_CS_PIN POINTING_DEVICE_CS_PIN
# else
# error "No chip select pin defined -- missing POINTING_DEVICE_CS_PIN or ADNS9800_CS_PIN"
# endif
#endif #endif
typedef struct { typedef struct {

6
drivers/sensors/cirque_pinnacle.h
View file

@ -78,7 +78,11 @@
# define CIRQUE_PINNACLE_SPI_DIVISOR 64 # define CIRQUE_PINNACLE_SPI_DIVISOR 64
# endif # endif
# ifndef CIRQUE_PINNACLE_SPI_CS_PIN # ifndef CIRQUE_PINNACLE_SPI_CS_PIN
# error "No Chip Select pin has been defined -- missing CIRQUE_PINNACLE_SPI_CS_PIN define" # ifdef POINTING_DEVICE_CS_PIN
# define CIRQUE_PINNACLE_SPI_CS_PIN POINTING_DEVICE_CS_PIN
# else
# error "No Chip Select pin has been defined -- missing POINTING_DEVICE_CS_PIN or CIRQUE_PINNACLE_SPI_CS_PIN define"
# endif
# endif # endif
# endif # endif
#endif #endif

12
drivers/sensors/paw3204.h
View file

@ -20,10 +20,18 @@
#include <stdbool.h> #include <stdbool.h>
#ifndef PAW3204_SCLK_PIN #ifndef PAW3204_SCLK_PIN
# error "No clock pin defined -- missing PAW3204_SCLK_PIN" # ifdef POINTING_DEVICE_SCLK_PIN
# define PAW3204_SCLK_PIN POINTING_DEVICE_SCLK_PIN
# else
# error "No clock pin defined -- missing POINTING_DEVICE_SCLK_PIN or PAW3204_SCLK_PIN"
# endif
#endif #endif
#ifndef PAW3204_SDIO_PIN #ifndef PAW3204_SDIO_PIN
# error "No data pin defined -- missing PAW3204_SDIO_PIN" # ifdef POINTING_DEVICE_SDIO_PIN
# define PAW3204_SDIO_PIN POINTING_DEVICE_SDIO_PIN
# else
# error "No data pin defined -- missing POINTING_DEVICE_SDIO_PIN or PAW3204_SDIO_PIN"
# endif
#endif #endif
typedef struct { typedef struct {

6
drivers/sensors/pmw33xx_common.h
View file

@ -66,7 +66,13 @@ _Static_assert(sizeof((pmw33xx_report_t){0}.motion) == 1, "pmw33xx_report_t.moti
// Support single and plural spellings // Support single and plural spellings
#ifndef PMW33XX_CS_PINS #ifndef PMW33XX_CS_PINS
# ifndef PMW33XX_CS_PIN # ifndef PMW33XX_CS_PIN
# ifdef POINTING_DEVICE_CS_PIN
# define PMW33XX_CS_PIN POINTING_DEVICE_CS_PIN
# define PMW33XX_CS_PINS \
{ PMW33XX_CS_PIN }
# else
# error "No chip select pin defined -- missing PMW33XX_CS_PIN or PMW33XX_CS_PINS" # error "No chip select pin defined -- missing PMW33XX_CS_PIN or PMW33XX_CS_PINS"
# endif
# else # else
# define PMW33XX_CS_PINS \ # define PMW33XX_CS_PINS \
{ PMW33XX_CS_PIN } { PMW33XX_CS_PIN }