lokher d3c413bfd0 Move WB32_EXTI_REQUIRED to config.h of board GENERIC_WB32_F3G71XX		2024-08-21 14:21:49 +08:00
..
ansi_encoder	Added Lemokey P1 Pro	2024-08-21 11:20:44 +08:00
iso_encoder	Added Lemokey P1 Pro	2024-08-21 11:20:44 +08:00
via_json	Added Lemokey P1 Pro	2024-08-21 11:20:44 +08:00
config.h	Added Lemokey P1 Pro	2024-08-21 11:20:44 +08:00
halconf.h	Added Lemokey P1 Pro	2024-08-21 11:20:44 +08:00
info.json	Added Lemokey P1 Pro	2024-08-21 11:20:44 +08:00
mcuconf.h	Move WB32_EXTI_REQUIRED to config.h of board GENERIC_WB32_F3G71XX	2024-08-21 14:21:49 +08:00
p1_pro.c	Added Lemokey P1 Pro	2024-08-21 11:20:44 +08:00
post_rules.mk	Added Lemokey P1 Pro	2024-08-21 11:20:44 +08:00
readme.md	Added Lemokey P1 Pro	2024-08-21 11:20:44 +08:00
rules.mk	Added Lemokey P1 Pro	2024-08-21 11:20:44 +08:00

readme.md

Lemokey P1 Pro

![Lemokey P1 Pro]

A customizable 75% keyboard.

Keyboard Maintainer: Keychron
Hardware Supported: Lemokey P1 Pro
Hardware Availability: [Lemokey P1 Pro QMK/VIA Wireless Custom Mechanical Keyboard]

Make example for this keyboard (after setting up your build environment):

make lemokey/p1_pro/ansi_encoder:default

Flashing example for this keyboard:

make lemokey/p1_pro/ansi_encoder:default:flash

Reset Key: Disconnect the USB cable, toggle mode switch to "Cable", hold down the Esc key or reset button underneath space bar, then connect the USB cable.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.